These devices assert a reset signal whenever the VCC supply voltage declines below a preset threshold or whenever manual reset (MR) is asserted. Reset remains asserted for a fixed timeout delay after VCC has risen above the reset threshold or when manual reset is deasserted. Five different timeout periods are available: 70s (voltage detector), 1.5ms, 30ms, 210ms, and 1.68s. Reset thresholds suitable for operation with a variety of supply voltages are available. The MAX6832/MAX6835/MAX6838 have a push-pull active-low reset output ( RESET ). The MAX6833/ MAX6836/MAX6839 have a push-pull active-high reset output (RESET) and the MAX6834/MAX6837/MAX6840 have an open-drain active-low reset output (RESET). The open-drain active-low reset output requires a pullup resistor that can be connected to a voltage higher than VCC. The MAX6835/MAX6836/MAX6837 feature a debounced manual reset input (MR), while the MAX6838/MAX6839/ MAX6840 provide a RESET-IN input allowing the user to externally adjust the reset threshold. The reset comparator is designed to ignore fast transients on VCC. Low supply current of 7.5A makes the MAX6832 MAX6840 ideal for use in portable equipment. These devices are available in 3- and 4-pin SC70 packages.