The MAX6620 controls the speeds of up to four fans using four independent linear voltage outputs. The drive voltages for the fans are controlled directly over the I2C interface. Each output drives the base of an external bipolar transistor or the gate of a FET in highside drive configuration. Voltage feedback at the fan's power-supply terminal is used to force the correct output voltage. The MAX6620 offers two methods for fan control. In RPM mode, the MAX6620 monitors four fan tachometer logic outputs for precise (1%) control of fan RPM and detection of fan failure. In DAC mode, each fan is driven with a voltage resolution of 9 bits and the tachometer outputs of the fans are monitored for failure. The DAC_START input selects the fan power-supply voltage at startup to ensure appropriate fan drive when power is first applied. A watchdog feature turns the fans fully on to protect the system if there are no valid I2C communications within a preset timeout period. The MAX6620 operates from a 3.0V to 5.5V power supply with low 250A supply current, and the I2C-compatible interface makes it ideal for fan control in a wide range of cooling applications. The MAX6620 is available in a 28-pin TQFN package and operates over the -40C to +125C automotive temperature range.