|
|
Partname: | MAX5930 |
Description: | Low-Voltage, Triple, Hot-Swap Controllers/ Power Sequencers/Voltage Trackers |
Manufacturer: | Maxim Integrated Products |
Datasheet: | PDF (486K). Click here to download *) |
The MAX5930/MAX5931 +1V to +13.2V triple hot-swap controllers provide complete protection for multisupply systems. They allow the safe insertion and removal of circuit cards into live backplanes. These devices hot swap multiple supplies ranging from +1V to +13.2V, provided one supply is at or above +2.7V and only one supply is above 11V. The input voltage rails (channels) can be configured to sequentially turn-on/off, track each other, or have completely independent operation. The discharged filter capacitors of the circuit card provide low impedance to the live backplane. High inrush currents from the backplane to the circuit card can burn up connectors and components, or momentarily collapse the backplane power supply leading to a system reset. The MAX5930/MAX5931 hot-swap controllers prevent such problems by gradually ramping up the output voltage and regulating the current to a preset limit when the board is plugged in, allowing the system to stabilize safely. After the startup cycle is complete, on-chip comparators provide VariableSpeed/BiLevelTM protection against short-circuit and overcurrent faults, and provide immunity against system noise and load transients. |
|
![Click here to download MAX5930 Datasheet](../../../pndecoder/datasheets/MAXIM/img/003182.gif) Click here to download MAX5930 Datasheet*) |
![](http://www.chipdocs.com/common/img/1x10t.gif) |
*)Datasheets downloading from ChipDocs is only for our members (paid service). REGISTER NOW for your membership. |
|
|
|