The internal 1% accurate 10-bit ADC measures each input and compares the result to one overvoltage, one undervoltage, and one early warning limit that can be configured as either undervoltage or overvoltage. A fault signal asserts when a monitored voltage falls outside the set limits. Up to three independent fault output signals are configurable to assert under various fault conditions. Because the MAX16065/MAX16066 support a powersupply voltage of up to 14V, they can be powered directly from the 12V intermediate bus in many systems. The integrated sequencer provides precise control over the power-up and power-down order of up to twelve (MAX16065) or up to eight (MAX16066) power supplies. Eight outputs (EN_OUT1EN_OUT8) are configurable with charge-pump outputs to directly drive external n-channel MOSFETs.