The output voltage can be set freely within a range of 1.5V~15.0V with 1.0V (accuracy 1.5%) of internal reference voltage by using externally connected resistors (RFB1, 2). Synchronous rectification PWM control can be switched to non-synchronous 30mV current limit PFM/PWM automatic switchable control (= voltage between RSENSE pins) by using the MODE pin. The series has a built-in voltage detector for monitoring a selected voltage by external resistors. During stand-by (CE pin = low) all circuits are shutdown to reduce current consumption to as low as 3.0A or less.