The TLC5903 is a constant current driver that incorporates shift register, data latch, and constant current circuitry with an adjustable current value and a 256 gray scale display that uses pulse width control. The output current can be selected at a maximum of 80 mA with 16 bits or 120 mA with 8 bits. The current value of the constant current output is set by one external register. After this device is mounted on a printed-circuit board (PCB), the brightness deviation between LEDs (ICs) can be adjusted by using an external data input. The brightness control for the panel can be adjusted using the brightness adjustment circuitry. Moreover, the device incorporates watchdog timer (WDT) circuitry, which turns the constant current output off when the scan signal is stopped during the dynamic scanning operation, and thermal shutdown (TSD) circuitry, which turns the constant current output off when the junction temperature exceeds the limit.