|
|
Partname: | SN74LVTH2952DGV |
Description: | 3.3-V ABT OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS |
Manufacturer: | Texas Instruments |
Datasheet: | PDF (124K). Click here to download *) |
The 'LVTH2952 devices consist of two 8-bit back-to-back registers that store data flowing in both directions between two bidirectional buses. Data on the A or B bus is stored in the registers on the low-to-high transition of the clock (CLKAB or CLKBA) input, provided that the clock-enable (CLKENAB or CLKENBA) input is low. Taking the output-enable (OEAB or OEBA) input low accesses the data on either port. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. When VCC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. |
|
![Click here to download SN74LVTH2952DGV Datasheet](../../../pndecoder/datasheets/TI/img/006819.gif) Click here to download SN74LVTH2952DGV Datasheet*) |
![](http://www.chipdocs.com/common/img/1x10t.gif) |
*)Datasheets downloading from ChipDocs is only for our members (paid service). REGISTER NOW for your membership. |
|
|
|