ChipDocs - Datasheet Source for Semiconductor and Electronic Circuit Components
More than
4 307 195 
components listed
Partname:SMH4814NR01
Description:Dual Feed Active-ORing Programmable Hot Swap Controller
Manufacturer:
Datasheet:PDF (926K).
Click here to download *)

The SMH4814 is an integrated power controller designed to control the hot-swapping of plug-in cards in a distributed power environment. The SMH4814 drives external power MOSFET switches that connect the supply to the load while reducing in-rush current and providing over-current protection. When the source and drain voltages of the external MOSFETs are within specification the SMH4814 asserts the four PUP logic outputs in a programmable cascade sequence to enable the DC/DC converters. The SMH4814 also monitors two independent 48V feeds. The redundant power supplies allow for high availability and reliability. The traditional method of supplying power from these feeds is via ORing power diodes, which consume a significant amount of power. The SMH4814 allows low-RDSON FETs to be used in place of ORing diodes to reduce power consumption. The SMH4814 determines when at least one of the 48V feeds is within an acceptable voltage range and switches on the appropriate FET path while providing slew rate control. The SMH4814 continuously monitors the incoming feeds and switches to the most negative feed as necessary. The SMH4814 is programmed and controlled using the I2C bus as required in ATCATM applications.

Click here to download SMH4814NR01 Datasheet
Click here to download SMH4814NR01 Datasheet
*)
*)Datasheets downloading from ChipDocs is only for our members (paid service). REGISTER NOW for your membership.
Free Electronics Engineering Subscription
Win Win Circuit - PCB,PCBA,Touch Screen,LED Lighting
Win Win Circuit LTD. PCB, PCBA, LCD Module
www.wwteq.com
COPYRIGHT 1997-2024 ChipDocs  ALL RIGHT RESERVED