The EClamp 3343C is designed to satisfy the termination and filtering requirements of USB On the Go (OTG) and USB 2.0 low and full speed operation. The termination is set by a 33 ohm resistor. The filtering and edge rate control is accomplished with 47pF capacitors on each USB data line. This device is also designed to provide electrostatic discharge (ESD) protection in excess of 15kV (Air) and 8kV (Contact) per IEC 61000-4-2, level 4 on both data (D+, D-) lines as well as the voltage bus and ID pins. TM