The SCAN50C400 is a four-channel high-speed backplane transceiver (SERDES) designed to support multiple line data rates at 1.25, 2.5 or 5.0 Gbps over a printed circuit board backplane. It provides a data link of up to 20 Gbps total through-put in each direction. Each transmit section of the SCAN50C400 takes a 4-bit differential LVDS source synchronous data bus, serializing it to a differential high-speed serial bit stream and output from a CML driver. The receive section of the SCAN50C400 consists of a differential input stage, a clock/data recovery PLL, a serial-to-parallel converter, and a LVDS output bus. De-emphasis at the high-speed driver outputs and a limiting amplifier circuit at the receiver inputs are used to reduce ISI distortions to enable error-free data transmission over more than 26 inches point-to-point link with a low cost FR4 backplane. Internal low jitter PLLs are used to derive the high-speed serial clock from a differential reference clock source. Two channels share common transmit and receive LVDS clocks.