The LM18293 is designed to drive DC loads up to one amp Typical applications include driving such inductive loads as solenoids relays and stepper motors along with driving switching power transistors and use as a buffer for low level logic signals The four inputs accept standard TTL and DTL levels for ease of interfacing Two enable pins are provided that also accept the standard TTL and DTL levels Each enable controls 2 channels and when an enable pin is disabled (tied low) the corresponding outputs are forced to the TRI-STATE condition If the enable pins are not connected (i e floating) the circuit will function as if it has been enabled Separate pins are provided for the main power supply (pin 8) and the logic supply (pin 16) This allows a lower voltage to be used to bias up the logic resulting in reduced power dissipation The chip is packaged in a specially de-