The MPC9120 is a 1:10 LVCMOS fanout buffer targeted to support Intel based Pentium IITM microprocessor chip sets. The device features 10 low skew outputs optimized to drive the clock inputs of standard unbuffered SODIMM SDRAM modules. Standard unbuffered SODIMM SDRAM modules require two clocks per module allowing for the device to drive up to four modules. The output buffers have been optimized to drive the load presented by the SDRAM module. The MPC9120 provides output shut off capabilities via an I2C serial port for applications which plan to use fewer than four modules and desire to minimize the power dissipation of the chip. Every output clock can be individually enabled/disabled through fields in the I2C control registers. After power up the default state is all outputs enabled. In applications where this default state is acceptable the I2C ports need not be exercised.