The MC12095 is a single modulus prescaler for low power frequency division of a 2.5 GHz high frequency input signal. Motorola's advanced MOSAICTM V technology is utilized to acheive low power dissipation of 24 mW at a minimum supply voltage of 2.7 V. Onchip output termination provides output current to drive a 2.0 pF (typical) high impedance load. If additional drive is required for the prescaler output, an external resistor can be added in parallel from the OUT pin to GND to increase the output power. Care must be taken not to exceed the maximum allowable current through the output. Divide ratio control input (SW) selects the required divide ratio of 2 or 4. StandBy mode is available to reduce current drain to 100A typical when the standby pin SB is switched LOW disabling the prescaler.