The MAX5913/MAX5914 feature an internal undervoltage lockout (UVLO) function that prevents the FET from turning on, if VCC does not exceed the default value of +32V. The devices also feature a +12V relay driver with 100mA current drive capable of driving low-voltage +3.3V relays. The MAX5913 features an active-low relay driver that sinks current when the relay output is enabled. The MAX5914 features an active-high relay driver output that sources 1mA to drive an external FET relay driver when the relay output is enabled. Control circuitry ensures the relays and the FETs are off until V CC reaches the UVLO threshold. The MAX5913/ MAX5914 use an external sense resistor to enable all the internal current-sense functions. The MAX5913/MAX5914 feature a programmable analog current-limit circuit. If the switch remains in current limit for more than a programmable time, the N-channel FET latches off and the supply can be restarted either by autoretry or by an external command after the preset off-time has elapsed.