The DS2118M Ultra2 LVD/SE SCSI Terminator is both a Low Voltage Differential (LVD) and SingleEnded (SE) terminator. The multimode operation enables the designer to implement LVD in current products while allowing the end-user SE backward compatibility with legacy devices. If the device is connected in an LVD-only bus, the DS2118M will use LVD termination. If any SE devices are connected to the bus, the DS2118M will use SE termination. This is accomplished automatically inside the part by sensing the voltage on the SCSI bus DIFFSENS line. For the LVD termination, the DS2118M integrates two regulated supplies with nine precision resistor strings. For the SE termination, one regulator and nine precision 110-ohm resistors are used. Three DS2118M terminators are needed for a Wide SCSI bus.