The DS1336 Afterburner Chip is designed to provide power switching between a primary power supply (VCC) and a backup battery power supply (VBAT). Five VCC and two battery paths are provided which can be used individually or in parallel to supply uninterrupted power in applications such as SRAM networks. When used with one of the Dallas power monitoring devices listed in Table 1, the DS1336 allows a load to be switched from its main power supply VCC to a battery backup supply when VCC falls out of tolerance. A user may selectively tie together any combination of the output pins to provide the desired high current supply, providing up to 300 mA per OUT pin or a maximum of 1.5A. Depending upon the user' backup supply load requirements, either of the VBAT outputs may be tied to the OUT pins to supply s