The e5130 contains 4 independent driver outputs with an ON resistance of typically 25 W (15 W) for the P-channel output transistors and typically 20 W (13 W) for the N-channel output transistors at a supply voltage of 1.5 V (3 V). To obtain a fast transition of the outputs even for slow rise/fall time input signals, all digital inputs (IN1 to IN4) have a Schmitt-trigger characteristic with a hysteresis of typically 50 mV. If a higher driving capability is needed, all inputs and outputs may be connected in parallel. In this case the rise/fall time of the input signals IN1 to IN4 must be less than 200 ns. Due to the fast switching characteristic of the tri-statable output drivers, the circuit is also suited as a low-voltage bus driver.