ChipDocs - Datasheet Source for Semiconductor and Electronic Circuit Components
More than
476 885 
registered clients
Partname:ADM1171-2AUJZ-RL7
Description: 2.7 V to 16.5 V Hot Swap Controller with Current Sense Output
Manufacturer:Analog Devices
Datasheet:PDF (255K).
Click here to download *)

The ADM1171 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An internal charge pump is used to enhance the gate of the N-channel FET. When an overcurrent condition is detected, the gate voltage of the FET is reduced to limit the current flowing through the sense resistor. During an overcurrent condition, the TIMER cap determines the amount of time the FET remains at a current limiting mode of operation until it is shut down. The ON (ON-CLR) pin is the enable input for the device and can be used to monitor the input supply voltage. The ADM1171 operates with a supply voltage ranging from 2.7 V to 16.5 V.

Click here to download ADM1171-2AUJZ-RL7 Datasheet
Click here to download ADM1171-2AUJZ-RL7 Datasheet
*)
*)Datasheets downloading from ChipDocs is only for our members (paid service). REGISTER NOW for your membership.
Free Subscription to Military & Aerospace Electronics Magazine
Free Subscription to Military & Aerospace Electronics Magazine
Military & Aerospace Electronics Magazine.
Subscribe now for FREE !
Win Win Circuit - PCB,PCBA,Touch Screen,LED Lighting
Win Win Circuit LTD. PCB, PCBA, LCD Module
www.wwteq.com
COPYRIGHT 1997-2016 ChipDocs  ALL RIGHT RESERVED