The AD5532 is a 32-channel voltage-output 14-bit DAC with an additional infinite sample-and-hold mode. The selected DAC register is written to via the 3-wire serial interface and VOUT for this DAC is then updated to reflect the new contents of the DAC register. DAC selection is accomplished via address bits A0A4. The output voltage range is determined by the offset voltage at the OFFS_IN pin and the gain of the output amplifier. It is restricted to a range from VSS + 2 V to VDD 2 V because of the headroom of the output amplifier. The device is operated with AVCC = 5 V 5%, DVCC = 2.7 V to 5.25 V, VSS = 4.75 V to 16.5 V and VDD = 8 V to 16.5 V and requires a stable +3 V reference on REF_IN as well as an offset voltage on OFFS_IN.