ChipDocs - Datasheet Source for Semiconductor and Electronic Circuit Components
More than
12 519 786 
queries processed
Description:Low Power Driver /Receiver For MIL-STD-1553 & Macair
Manufacturer:Aeroflex Inc.
Datasheet:PDF (103K).
Click here to download *)

The CT3232 Driver section accepts complementary TTL Data at the input, and produces a 30 Volt nominal peak-to-peak differential signal across a 140 load at the output. When coupled to the Data Bus with a 1:1 transformer, isolated on the Data Bus side with two 55.0 fault isolation resistors, and loaded by two 70 terminations plus additional receivers, the Data Bus signal produced is 7.2 Volts nominal peak-to-peak. When both "DATA" and "DATA" inputs are held low or both are held high, the driver output becomes a high impedance and is "removed" from the line. In addition, an overriding "INHIBIT" input provides for removal of the Driver output from the line. A logic "1" applied to the "INHIBIT" takes priority over the condition of the data inputs and disables the Driver. See Driver Logic Waveforms, Figure 3.

Click here to download CT3232MFP Datasheet
Click here to download CT3232MFP Datasheet
*)Datasheets downloading from ChipDocs is only for our members (paid service). REGISTER NOW for your membership.
Free Subscription to Biophotonics International Magazine
Free Subscription to Biophotonics International Magazine
Biophotonics International Magazine.
Subscribe now for FREE !
Win Win Circuit - PCB,PCBA,Touch Screen,LED Lighting
Win Win Circuit LTD. PCB, PCBA, LCD Module